|
Crash Doors
Our range of crash doors
provide an alternative solution to PVC Strip Curtains, providing
heat retention and noise reduction in the workplace.
We supply several types of
crash doors to provide a low maintenance answer to reducing
energy waste that can occur in Shops, factories and hospitals,
without affecting speed of movement through these openings.
As with our PVC strip
curtains, we offer a full nationwide installation service for
the crash doors.
Superflex
Crash Doors
These doors are manufactured from high quality extruded
aluminium section, that has smooth lines and no projections.
Used frequently within the food industry this is a lighter
duty door than others in the range and has the panel fixings
concealed within the framework. Suitable for use on internal
openings with pedestrian, hand or light powered traffic on
openings up to 2400mm wide x 2438mm high. |
 |
Interflex
Crash Doors
Manufactured from 60mm o/d heavy wall mild steel steam tube,
with a horizontal gusset plate and vertical mild steel flats
to hold the panel in position. Suitable for
semi-external/external openings dependent on site
conditions, for use by pedestrian and powered traffic.
Offering a heavier duty construction than the Multiflex and
Superflex these doors are suitable for use on openings up to
3000mm wide x 3350mm high. N.B. On openings above 2600mm
wide the triangular gusset plates will be replaced by
horizontal top tubes.
|
 |
Multiflex Crash Doors
Manufactured from 43mm o/d heavy wall mild steel steam tube,
with a horizontal gusset plate and vertical mild steel flats
to hold the panel in position. Suitable for us many
applications, dependent on panel choice. They are ideal for
internal openings but can be used on semi-extemal/external
openings dependent on site conditions They allow access by
pedestrian, hand or powered traffic on openings up to 2400mm
wide x 2600mm high. |
 |
Powerflex Crash Doors
Manufactured from 60mm old heavy wall mild steel steam tube
with a horizontal top tube, vertical mild steel flats and a
corner gusset plate to hold the panels in position. Suitable
for heavy duty external applications, with powered traffic.
Powerflex doors are suitable on openings up to 4000mm wide x
4000mm high and many extras are available to increase the
specification on the door framework and panels; i.e.
horizontal spring unit mechanisms, dome disc protection
studs, wearpads, increased overlap, larger clamping flats
etc. N.B. On doors below 2600mm wide the horizontal top
tubes will be replaced by triangular horizontal gusset
plates. |
|
In addition to our range
of crash doors, we can also supply high speed doors with either
pneumatic or electrical operation.
|